eDIY / MDIY / SUPER DIY Towers (18)
Yes, our eDIY and MDIY towers can reach a maximum working height of 7.15m (23’5″) and our SUPER DIY has a maximum working height of 9.35m (30’9″).
For anything taller please see our Trade King and Loyal Industrial towers.
Super DIY 7 will fit into most hatchbacks with its 1m framed design.
Super eDIY range and Super DIY 8/9 will fit into most estate cars.
Please check the packing size details in the specification table on the product pages and your car load space before ordering.
Yes you can; by releasing the bolt and wing nuts. Warning: It is dangerous to use the DIY tower without the base bars unless you tie the tower to something rigid or use outriggers.
Only if your existing tower is from our DIY tower range. You cannot not mix brands from different manufacturers.
Yes, sometimes the two bottom base bars of our DIY tower may need to be removed.
Strictly speaking, no. But having two or four outriggers will give a bigger footprint and make the tower feel more secure. In addition, the outriggers can give extra adjustments to uneven ground. Especially in garden use.
Certification is not currently required for DIY towers. Our domestic tower platforms are load tested according to the EN1004 Class 3 standard.
Go for our eDIY/MDIY/SUPER DIY Advanced Towers with height adjustable base plates.
Click here to go to eDIY Advanced Towers | MDIY Advanced Towers | SDIY Advanced Towers.
Take a look at our video on the website where a colleague assembles a SUPER DIY 5 Scaffold Tower straight out from a small car in just a few minutes. The higher towers will take slightly longer, and it is advisable to do this with two people.
Assemble a SUPER DIY 5 Scaffold Tower straight out from a small car
(DIY towers) 4m – 1 pack, 5m – 1 pack, 6m – 2 packs, 7m – 2 packs, 8m – 3 packs, 9m – 3 packs
The width of our DIY towers is 600mm (measured centre-to-centre on the frame uprights). The outer dimension is 40mm more.
Yes, you can buy a 2m extension pack for your eDIY tower, MDIY tower or SUPER DIY tower if required. Please visit the relevant accessories section for the extension packs.
Click here to go to eDIY & MDIY Tower Accessories | SDIY Tower Accessories.
(DIY Towers) The extension pack has almost as much material as a tower. The pack includes an extra platform, 4 telescopic outriggers and the corresponding extension frames, horizontal braces, and diagonal braces.
Please see Comparison of DIY Towers
Click help in selecting your scaffold tower if you need.
The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.
Our SUPER DIY tower platforms have one quick locking catch at one end and 2 hooks the other for easy removal. Simply release the hooks and depress the catch with one hand while lifting the platform with the other to remove.
eDIY Advanced Plus Towers (1)
The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.
Our SUPER DIY tower platforms have one quick locking catch at one end and 2 hooks the other for easy removal. Simply release the hooks and depress the catch with one hand while lifting the platform with the other to remove.
eDIY Advanced Scaffold Towers (1)
The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.
Our SUPER DIY tower platforms have one quick locking catch at one end and 2 hooks the other for easy removal. Simply release the hooks and depress the catch with one hand while lifting the platform with the other to remove.
eDIY Towers (1)
The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.
Our SUPER DIY tower platforms have one quick locking catch at one end and 2 hooks the other for easy removal. Simply release the hooks and depress the catch with one hand while lifting the platform with the other to remove.